Inserting, Updating, and Deleting Data

This section provides information about manipulating data and concurrent access in SynxDB.

This topic includes the following subtopics:

• About Concurrency Control in SynxDB
• Inserting Rows
• Updating Existing Rows
• Deleting Rows
• Working With Transactions
• Global Deadlock Detector
• Vacuuming the Database
• Running Out of Locks

About Concurrency Control in SynxDB

SynxDB and PostgreSQL do not use locks for concurrency control. They maintain data consistency using a multiversion model, Multiversion Concurrency Control (MVCC). MVCC achieves transaction isolation for each database session, and each query transaction sees a snapshot of data. This ensures the transaction sees consistent data that is not affected by other concurrent transactions.

Because MVCC does not use explicit locks for concurrency control, lock contention is minimized and SynxDB maintains reasonable performance in multiuser environments. Locks acquired for querying (reading) data do not conflict with locks acquired for writing data.

SynxDB provides multiple lock modes to control concurrent access to data in tables. Most SynxDB SQL commands automatically acquire the appropriate locks to ensure that referenced tables are not dropped or modified in incompatible ways while a command runs. For applications that cannot adapt easily to MVCC behavior, you can use the LOCK command to acquire explicit locks. However, proper use of MVCC generally provides better performance.

Note By default SynxDB acquires the more restrictive EXCLUSIVE lock (rather than ROW EXCLUSIVE in PostgreSQL) for UPDATE, DELETE, and SELECT...FOR UPDATE operations on heap tables. When the Global Deadlock Detector is enabled the lock mode for UPDATE and DELETE operations on heap tables is ROW EXCLUSIVE. See Global Deadlock Detector. SynxDB always holds a table-level lock with SELECT...FOR UPDATE statements.

Inserting Rows

Use the INSERT command to create rows in a table. This command requires the table name and a value for each column in the table; you may optionally specify the column names in any order. If you do not specify column names, list the data values in the order of the columns in the table, separated by commas.

For example, to specify the column names and the values to insert:

INSERT INTO products (name, price, product_no) VALUES ('Cheese', 9.99, 1);

To specify only the values to insert:

INSERT INTO products VALUES (1, 'Cheese', 9.99);

Usually, the data values are literals (constants), but you can also use scalar expressions. For example:

INSERT INTO films SELECT * FROM tmp_films WHERE date_prod < 
'2016-05-07';

You can insert multiple rows in a single command. For example:

INSERT INTO products (product_no, name, price) VALUES
    (1, 'Cheese', 9.99),
    (2, 'Bread', 1.99),
    (3, 'Milk', 2.99);

To insert data into a partitioned table, you specify the root partitioned table, the table created with the CREATE TABLE command. You also can specify a leaf child table of the partitioned table in an INSERT command. An error is returned if the data is not valid for the specified leaf child table. Specifying a child table that is not a leaf child table in the INSERT command is not supported.

To insert large amounts of data, use external tables or the COPY command. These load mechanisms are more efficient than INSERT for inserting large quantities of rows. See Loading and Unloading Data for more information about bulk data loading.

The storage model of append-optimized tables is optimized for bulk data loading. SynxDB does not recommend single row INSERT statements for append-optimized tables. For append-optimized tables, SynxDB supports a maximum of 127 concurrent INSERT transactions into a single append-optimized table.

Updating Existing Rows

The UPDATE command updates rows in a table. You can update all rows, a subset of all rows, or individual rows in a table. You can update each column separately without affecting other columns.

To perform an update, you need:

• The name of the table and columns to update
• The new values of the columns
• One or more conditions specifying the row or rows to be updated.

For example, the following command updates all products that have a price of 5 to have a price of 10:

UPDATE products SET price = 10 WHERE price = 5;

Using UPDATE in SynxDB has the following restrictions:

• While GPORCA supports updates to SynxDB distribution key columns, the Postgres Planner does not.
• If mirrors are enabled, you cannot use STABLE or VOLATILE functions in an UPDATE statement.
• SynxDB partitioning columns cannot be updated.

Deleting Rows

The DELETE command deletes rows from a table. Specify a WHERE clause to delete rows that match certain criteria. If you do not specify a WHERE clause, all rows in the table are deleted. The result is a valid, but empty, table. For example, to remove all rows from the products table that have a price of 10:

DELETE FROM products WHERE price = 10;

To delete all rows from a table:

DELETE FROM products; 

Using DELETE in SynxDB has similar restrictions to using UPDATE:

• If mirrors are enabled, you cannot use STABLE or VOLATILE functions in an UPDATE statement.

Truncating a Table

Use the TRUNCATE command to quickly remove all rows in a table. For example:

TRUNCATE mytable;

This command empties a table of all rows in one operation. Note that TRUNCATE does not scan the table, therefore it does not process inherited child tables or ON DELETE rewrite rules. The command truncates only rows in the named table.

Working With Transactions

Transactions allow you to bundle multiple SQL statements in one all-or-nothing operation.

The following are the SynxDB SQL transaction commands:

• BEGIN or START TRANSACTIONstarts a transaction block.
• END or COMMIT commits the results of a transaction.
• ROLLBACK abandons a transaction without making any changes.
• SAVEPOINT marks a place in a transaction and enables partial rollback. You can roll back commands run after a savepoint while maintaining commands run before the savepoint.
• ROLLBACK TO SAVEPOINT rolls back a transaction to a savepoint.
• RELEASE SAVEPOINT destroys a savepoint within a transaction.

Transaction Isolation Levels

SynxDB accepts the standard SQL transaction levels as follows:

• READ UNCOMMITTED and READ COMMITTED behave like the standard READ COMMITTED.
• REPEATABLE READ and SERIALIZABLE behave like REPEATABLE READ.

The following information describes the behavior of the SynxDB transaction levels.

Read Uncommitted and Read Committed

SynxDB does not allow any command to see an uncommitted update in another concurrent transaction, so READ UNCOMMITTED behaves the same as READ COMMITTED. READ COMMITTED provides fast, simple, partial transaction isolation. SELECT, UPDATE, and DELETE commands operate on a snapshot of the database taken when the query started.

A SELECT query:

• Sees data committed before the query starts.
• Sees updates run within the transaction.
• Does not see uncommitted data outside the transaction.
• Can possibly see changes that concurrent transactions made if the concurrent transaction is committed after the initial read in its own transaction.

Successive SELECT queries in the same transaction can see different data if other concurrent transactions commit changes between the successive queries. UPDATE and DELETE commands find only rows committed before the commands started.

READ COMMITTED transaction isolation allows concurrent transactions to modify or lock a row before UPDATE or DELETE find the row. READ COMMITTED transaction isolation may be inadequate for applications that perform complex queries and updates and require a consistent view of the database.

Repeatable Read and Serializable

SERIALIZABLE transaction isolation, as defined by the SQL standard, ensures that transactions that run concurrently produce the same results as if they were run one after another. If you specify SERIALIZABLE SynxDB falls back to REPEATABLE READ. REPEATABLE READ transactions prevent dirty reads, non-repeatable reads, and phantom reads without expensive locking, but SynxDB does not detect all serializability interactions that can occur during concurrent transaction execution. Concurrent transactions should be examined to identify interactions that are not prevented by disallowing concurrent updates of the same data. You can prevent these interactions by using explicit table locks or by requiring the conflicting transactions to update a dummy row introduced to represent the conflict.

With REPEATABLE READ transactions, a SELECT query:

• Sees a snapshot of the data as of the start of the transaction (not as of the start of the current query within the transaction).
• Sees only data committed before the query starts.
• Sees updates run within the transaction.
• Does not see uncommitted data outside the transaction.
• Does not see changes that concurrent transactions make.
• Successive SELECT commands within a single transaction always see the same data.
• UPDATE, DELETE, SELECT FOR UPDATE, and SELECT FOR SHARE commands find only rows committed before the command started. If a concurrent transaction has updated, deleted, or locked a target row, the REPEATABLE READ transaction waits for the concurrent transaction to commit or roll back the change. If the concurrent transaction commits the change, the REPEATABLE READ transaction rolls back. If the concurrent transaction rolls back its change, the REPEATABLE READ transaction can commit its changes.

The default transaction isolation level in SynxDB is READ COMMITTED. To change the isolation level for a transaction, declare the isolation level when you BEGIN the transaction or use the SET TRANSACTION command after the transaction starts.

Global Deadlock Detector

The SynxDB Global Deadlock Detector background worker process collects lock information on all segments and uses a directed algorithm to detect the existence of local and global deadlocks. This algorithm allows SynxDB to relax concurrent update and delete restrictions on heap tables. (SynxDB still employs table-level locking on AO/CO tables, restricting concurrent UPDATE, DELETE, and SELECT...FOR lock_strength operations.)

By default, the Global Deadlock Detector is deactivated and SynxDB runs the concurrent UPDATE and DELETE operations on a heap table serially. You can activate these concurrent updates and have the Global Deadlock Detector determine when a deadlock exists by setting the server configuration parameter gp_enable_global_deadlock_detector.

When the Global Deadlock Detector is enabled, the background worker process is automatically started on the master host when you start SynxDB. You configure the interval at which the Global Deadlock Detector collects and analyzes lock waiting data via the gp_global_deadlock_detector_period server configuration parameter.

If the Global Deadlock Detector determines that deadlock exists, it breaks the deadlock by cancelling one or more backend processes associated with the youngest transaction(s) involved.

When the Global Deadlock Detector determines a deadlock exists for the following types of transactions, only one of the transactions will succeed. The other transactions will fail with an error indicating that concurrent updates to the same row is not allowed.

• Concurrent transactions on the same row of a heap table where the first transaction is an update operation and a later transaction runs an update or delete and the query plan contains a motion operator.
• Concurrent update transactions on the same distribution key of a heap table that are run by the Postgres Planner.
• Concurrent update transactions on the same row of a hash table that are run by the GPORCA optimizer.

Note SynxDB uses the interval specified in the deadlock_timeout server configuration parameter for local deadlock detection. Because the local and global deadlock detection algorithms differ, the cancelled process(es) may differ depending upon which detector (local or global) SynxDB triggers first.

Note If the lock_timeout server configuration parameter is turned on and set to a value smaller than deadlock_timeout and gp_global_deadlock_detector_period, SynxDB will cancel a statement before it would ever trigger a deadlock check in that session.

To view lock waiting information for all segments, run the gp_dist_wait_status() user-defined function. You can use the output of this function to determine which transactions are waiting on locks, which transactions are holding locks, the lock types and mode, the waiter and holder session identifiers, and which segments are running the transactions. Sample output of the gp_dist_wait_status() function follows:

SELECT * FROM pg_catalog.gp_dist_wait_status();
-[ RECORD 1 ]----+--------------
segid            | 0
waiter_dxid      | 11
holder_dxid      | 12
holdTillEndXact  | t
waiter_lpid      | 31249
holder_lpid      | 31458
waiter_lockmode  | ShareLock
waiter_locktype  | transactionid
waiter_sessionid | 8
holder_sessionid | 9
-[ RECORD 2 ]----+--------------
segid            | 1
waiter_dxid      | 12
holder_dxid      | 11
holdTillEndXact  | t
waiter_lpid      | 31467
holder_lpid      | 31250
waiter_lockmode  | ShareLock
waiter_locktype  | transactionid
waiter_sessionid | 9
holder_sessionid | 8

When it cancels a transaction to break a deadlock, the Global Deadlock Detector reports the following error message:

ERROR:  canceling statement due to user request: "cancelled by global deadlock detector"

Global Deadlock Detector UPDATE and DELETE Compatibility

The Global Deadlock Detector can manage concurrent updates for these types of UPDATE and DELETE commands on heap tables:

• Simple UPDATE of a single table. Update a non-distribution key with the Postgres Planner. The command does not contain a FROM clause, or a sub-query in the WHERE clause.

  UPDATE t SET c2 = c2 + 1 WHERE c1 > 10;
  

• Simple DELETE of a single table. The command does not contain a sub-query in the FROM or WHERE clauses.

  DELETE FROM t WHERE c1 > 10;
  

• Split UPDATE. For the Postgres Planner, the UPDATE command updates a distribution key.

  UPDATE t SET c = c + 1; -- c is a distribution key
  

  For GPORCA, the UPDATE command updates a distribution key or references a distribution key.

  UPDATE t SET b = b + 1 WHERE c = 10; -- c is a distribution key
  

• Complex UPDATE. The UPDATE command includes multiple table joins.

  UPDATE t1 SET c = t1.c+1 FROM t2 WHERE t1.c = t2.c;
  

  Or the command contains a sub-query in the WHERE clause.

  UPDATE t SET c = c + 1 WHERE c > ALL(SELECT * FROM t1);
  

• Complex DELETE. A complex DELETE command is similar to a complex UPDATE, and involves multiple table joins or a sub-query.

  DELETE FROM t USING t1 WHERE t.c > t1.c;
  

The following table shows the concurrent UPDATE or DELETE commands that are managed by the Global Deadlock Detector. For example, concurrent simple UPDATE commands on the same table row are managed by the Global Deadlock Detector. For a concurrent complex UPDATE and a simple UPDATE, only one UPDATE is performed, and an error is returned for the other UPDATE.

Vacuuming the Database

Deleted or updated data rows occupy physical space on disk even though new transactions cannot see them. Periodically running the VACUUM command removes these expired rows. For example:

VACUUM mytable;

The VACUUM command collects table-level statistics such as the number of rows and pages. Vacuum all tables after loading data, including append-optimized tables. For information about recommended routine vacuum operations, see Routine Vacuum and Analyze.

Important The VACUUM, VACUUM FULL, and VACUUM ANALYZE commands should be used to maintain the data in a SynxDB database especially if updates and deletes are frequently performed on your database data. See the VACUUM command in the SynxDB Reference Guide for information about using the command.

Running Out of Locks

SynxDB can potentially run out of locks when a database operation accesses multiple tables in a single transaction. Backup and restore are examples of such operations.

When SynxDB runs out of locks, the error message that you may observe references a shared memory error:

... "WARNING","53200","out of shared memory",,,,,,"LOCK TABLE ...
... "ERROR","53200","out of shared memory",,"You might need to increase max_locks_per_transaction.",,,,"LOCK TABLE ...

Note “shared memory” in this context refers to the shared memory of the internal object: the lock slots. “Out of shared memory” does not refer to exhaustion of system- or SynxDB-level memory resources.

As the hint describes, consider increasing the max_locks_per_transaction server configuration parameter when you encounter this error.